Review about Resetter Canon MG5270 MP258 MP287 MP278 MP237 and iP2770 v3400
Canon is the best brand for printer, canon printer is the best in his era. For you who have problems with your Canon MG5270 MP258 MP287 MP278 MP237 and iP2770 printers, here we provide you the way to reset you printer.
How to Reset Printer Canon MG5270 MP258 MP287 MP278 MP237 and iP2770 – ink absorber is almost full – is as follows :
- – Turn on the printer , it will display a description of ” The Ink Absorber is Almost Full ” on the monitor screen
- – To reset the printer must be Service Mode .
- – This the way to make service mode
- – Download Resetter Canon Service Tool v3400 (Download here) or at the end of this posting
- – Turn off the printer by pressing the POWER button . Do not unplug the power cord .
- – Press and Hold the STOP / RESET and press the POWER button. So both buttons depressed position .
- – Remove the STOP / RESET but do not release the button powerd
- – In the circumstances the POWER button is still depressed , press the STOP / RESET 6 times .
- – Your computer will detect the new hardware . Ignore it .
The next step Exctract and Run Service Tool v3400 which was downloaded earlier .
- – In the clear ink counter absorber menu select Play then click SET to the right .
- – In the ink absorber counter menu select Play then click SET to the right .
- – Then click EEOPROM . then the printer will print one page .
- – Done .
- – Canon printer will return to normal .